In 1975, I moved to Newmarket, New Hampshire, and got my first full-time job working in a cabinet shop that was housed in an extension of a 100-year-old barn. The weight of the shop’s roof was spreading the walls and we needed to get a tie-rod to pull them back together. Steel rod was easy enough to find and have threaded, but we needed a big turnbuckle.Two of us went to the hardware store in town to see if we could find one there. It was not a hardware store you’d recognize today—it had as much used stuff as new. The building was an aged white-clapboard telescope house with creaky wooden floors. We found the proprietor sitting by a hot barrel stove in a threadbare easy chair. We told him what we were looking for, and without a word he got up and led us through the maze of aisles to one of the building’s extremities. In the middle of the aisle he pushed some stuff out of the way and uncovered a turnbuckle that was about 24″ long, exactly what we needed. “They were for cinching up big wooden water tanks,” he said. “Not much call for them now.” I expect that place is long gone.When I moved back home to Seattle and began building boats in 1978, there were three shops where I could buy new and used hardware and tools. There’s only one left now and its days are numbered. Hardwick’s Hardware was established in 1932 in the midst of the Great Depression by the current owner’s grandfather. The store has been in its current location since 1938. It’s a single-story building being engulfed by the construction of new, much taller buildings all around it.
Read this article now for Free!
Ready for a second free article? Create a free account by entering your email address and a password below.
— OR —
Subscribe now for $29.99 a year and have immediate access to all of our content, including hundreds of small-boat profiles, gear reviews and techniques, adventure stories, and more! You can also browse our entire archive of back issues starting from September 2014, as well as post unlimited classified ads. This is an extraordinary value!
My first real job at the age of 16 was in a small neighborhood hardware store. It was the perfect job for a kid with a strong back, no real experience, and a desire to learn. I’m sorry that those neighborhood stores have all been replaced by the big chains.
I will cross the continent in June to visit Hardwick’s again.
Someone needs to start a petition to persuade the city to make some tax concessions in order to allow this unique and valuable business to survive and thrive. Seattle will be the poorer if they lose this store.
You mentioned the compass planes, I inherited mine, but it would be unlikely I could replace it from any of the big chain stores. They have them in this store and at realistic prices.
You’re right it’s just plain sad to see places like Hardwick’s pass into history. We have a small hardware store in Fillmore, California, that’s been here for probably close to 100 years. They have an assortment of old tools and farm equipment dating back to the 19th century. Every time I go in, there is a feeling of being somewhere special. You can ask them anything and they will know where it is. I’d like to see them stay around for another 100 years.
If Hardwick’s doesn’t have it, you don’t need it.
When I lived in Seattle, Hardwick’s was my go to place for all my needs, especially boatbuilding. I now live in Bellingham, Washington, and I hold my breath, hoping that our Hardware Sales will remain in business. Hardwick’s is such a treasure. It is criminal that our profit-driven nation puts such highly valued places out of business, replaced by Blouwes and Home Creepo. I will try to get down for one last nostalgic and useful trip through this national treasure. Thank you for this article, Chris.
Davies Hardware, Poughkeepsie, NY. If it doesn’t have it and can explain how to do it, you don’t need it. Now live 600 miles away and think of them every time I have to go to Lowes or HD. My thoughts are not printable.
One of my favorite places is Anacortes, Washington,and its Marine Supply and Hardware store. We head north about twice a month and I always find something I “need” there.
Oh, I love that store. Having lived in the San Juan Islands, this was a must stop for ALL of your nautical and hardware needs. Seattle–I take the Port Townsend ferry to go around Seattle.
I bought my first hammer and nail sets there 36 years ago. On a rainy afternoon my 11-year-old daughter and I might be found just exploring and explaining. It’s such a great place to help connect a kid to what it takes to make… well, just about anything.
We’ve spent a lot of time and not just a few dollars there over the years and we’ll both be sad to see them go.
36 years and it smells the same as the first time I walked in.
I’ll miss Hardwick’s, but not as much as I still miss Doc Freeman’s or the Wooden Boat Shop. The world turns, things change, you either adapt or die. Aside from the rising property taxes they face an uncertain future where DIY is no longer the norm, and the internet will take an increasing share of their business. The family will sell that property for a small fortune, certainly enough to buy property and relocate to someplace like Georgetown if they chose, but it sounds like they plan to take their millions and retire. Can’t blame them for that.
Doc Freeman’s was where I shopped when I was making a modest living building and repairing small boats. The store had everything marine and the prices were unbeatable. In the early 1980s I worked at the Wooden Boat Shop in Seattle’s University District with the original owners, Joe Bucek and Land Washburn. I learned a lot and met many of the region’s boatbuilders there. The legendary boatbuilder Frank Prothero visited the store occasionally.
This is one of the reasons we fight to protect Proposition 13 [a measure to cap and reduce property taxes—Ed.] here in California.
Even though I might find items cheaper online (but probably not), and even if Seattle’s traffic and parking make it hard to shop there, I always go to Hardwick’s first. ALWAYS. I’m going to try to hold on to the dying experience of buying what you need from a human being with a smile, and a soul. Amazon, Costco, big box, China, you can all go to hell for all I care. Convenience and the lowest price are just not what life is about. Those that have forgotten that have lost something profound. Like we will be if we lose Hardwick’s. Sad times.
About all I can do from such a distance is raise a glass in a great toast to Hardwick’s.
Around the world, greedy councils and “Big Box” stores are forcing the closure of these hubs of the community. Where once kids would wonder in awe at the possibilities of what they could do, now they wander aimlessly around malls. DIY is getting harder due to the effort of finding “the exact thing,” if you actually know what you are looking for that is.
Very sad to see the demise of such a business.
When in Cocoa, Florida, visit S.F. Travis Hardware, established in 1885. Probably some original inventory in there somewhere.
Hardwick’s is like a chapel for wood and metal workers, and a nostalgic browse for anybody with a wooden soul. They stock anything you’d pray for, in the hardware line, that is. I started going there in the early ’70s, when they were able to take in far more used tools and equipment than in more recent decades. The Japanese stones, saws, chisels and whatnot were always priced less than other sources, and boat hardware, brass fittings, and so on, were there to be discovered. I went there at once after I buried a 9/16″ socket in the stern of a dugout canoe, found the random socket drawers, and began searching. I went through at least four good-sized drawers until I found the one 9/16 they had at the time (the most popular size in America, evidently) in almost new condition for 50 cents. Anacortes’ Marine Supply & Hardware was the same way, and though a shadow of its former self, still smells like tarred cordage. Back when founder Mike Demapolis was still there, he led me back through several rickety wooden storehouses behind the storefront to a W.W. I portable Army horseshoer’s coal forge, for what I remember was $25. I’ve dreaded the day these places might leave us ever since, they are such gems, and now the time is upon us. There’s no replacing them with what’s out there now, as everyone else has pointed out. Farewell, old friend.
I lived in Seattle in the early ’90s as a 20-year-old apprentice carpenter. I went to Hardwick’s many times and loved that place. One time I remember trying to find a “beater chisel” and having fellow patrons chastise me for referring to a cutting tool in such a way. That may have been one of the best woodworking tips I’ve ever had!!
When I was a kid, Schneider’s or Gruskin’s hardware in New London Connecticut had Collins lipped adze heads in a wooden crate. They had real neat black-and-white paper labels: Collins Axe Co, Legitimus, Collinsville, CT (as I remember). Supposedly they were W.W. I stock from the local wooden ship-building boom. Price: $25.00. Only bought one, durn it!
Walt Ansel, Mystic CT
I was pleasantly surprised at your mention of Newmarket, New Hampshire!
Thanks for your lovely piece on dwindling form of hardware store. Milligan & Currier Hardware in Manchester, New Hampshire, was much the same way. In 1952 I made my first trip there with my dad, who knew such treasure houses existed! I returned a couple of years ago and found the place still open and helpful, though the magic was now a bit dusty and lonesome. I think we lose a lot when our searches—whether for tools, books, adventures—are constrained by packaging and devoid of conversation with knowledgable guides.
I was interested in Hardwick’s as I lived in the village of Hardwick near Cambridge, UK, for a while. In Cambridge, just off Newmarket Road, we have a 3rd-generation family-run hardware store called Mackay’s which stocks just about anything and has a particularly well stocked fixings and fastenings section. Here you can still purchase individual screws from BSW, BA, to American standard and stainless to brass from a friend behind the counter. Staff are knowledgable and helpful to boot, often helping me with an obscure thread as I present them with a sample and say, “I’d like one of these please” or I ask, “How would you suggest I go about this?” I am concerned, that with the number of smaller store closures in Cambridge, that Mackay’s might close some time, what would we do then?