Some may think vacuum-bagging is intimidating, but it is an easy, multi-purpose technique that’s within reach of most amateur boatbuilders. While vacuum-bagging an entire hull may be beyond the means and requirements of the home boatbuilder, there are lots of small parts that would benefit from a simple vacuum system.

My Rietschle Pico vacuum pump is now 22 years old, has a small capacity of 350 cu ft per hour but has been more than adequate for all the jobs I’ve needed to do on my 20' ultralight stitch-and-glue coastal trekker, including a 28' carbon-fiber mast.photographs by the author

The author's Rietschle Pico vacuum pump is now 22 years old and has a small capacity of 350 cu ft per hour, but it has been more than adequate for all the jobs he's needed to do on his 20' ultralight stitch-and-glue coastal trekker, including its 28' carbon-fiber mast.

There are different types of suitable vacuum pumps. At the lower end of the scale, a salvaged refrigerator compressor is enough for occasional use. You can find compressors for under $100 on eBay. For more advanced work, rotary-vane pumps are the most popular, with second-hand prices beginning around $225 or less and around $675 new. My pump is an industrial-grade oil-free, graphite-vane pump with a small but sturdy 370-watt motor, designed to run continuously.

Read this article now for Free!

Ready for a second free article? Create a free account by entering your email address and a password below.

— OR —

Subscribe now for $29.99 a year and have immediate access to all of our content, including hundreds of small-boat profiles, gear reviews and techniques, adventure stories, and more! You can also browse our entire archive of back issues starting from September 2014, as well as post unlimited classified ads. This is an extraordinary value!

Subscribe Now or SIGN IN