A push-pull tiller requires a different kind of keeper than one for a conventional tiller.
Solo sailors of small open boats have a problem: While we’re sailing we’re stuck minding the helm. Occasionally there’s a need to go forward to adjust the downhaul or centerboard, use both hands to steady the binoculars, change a setting on the GPS, or eat lunch. Some boats can hold a course on their own, with the sails set to provide a neutral helm, but not always, and not on every point of sail. Some boats, like mine, have weather helm when beating and will round up if you let go of the tiller. Heaving-to takes time and brings progress to a halt.A tiller keeper is a device to hold the tiller and maintain a course while we tend to those other chores. There are many meant for conventional tillers, available both commercially available and as do-it-yourself projects, but there are not so many for the Norwegian-style, push-pull tillers. The best I have seen was the ingenious and elegant design that Eric Hvalsoe had developed for his BANDWAGON, which Tim Yeadon also implemented on his Hvalsoe-designed HAVERCHUCK. Like their boats, my FIRE-DRAKE has a Norwegian tiller to work around a mizzenmast, so I was eager to make a tiller keeper.
Read this article now for Free!
Ready for a second free article? Create a free account by entering your email address and a password below.
— OR —
Subscribe now for $29.99 a year and have immediate access to all of our content, including hundreds of small-boat profiles, gear reviews and techniques, adventure stories, and more! You can also browse our entire archive of back issues starting from September 2014, as well as post unlimited classified ads. This is an extraordinary value!
We welcome your comments about this article.
To include a photo with your remarks, click Choose File below the Comment box.
Comments (9)
This is pretty neat. I may well add it to one of my push pull tillers. One thing they all get is a lanyard of just the right length so I can steer, but it keeps me from dropping the tiller over board. It never can get more than a few inches from the hull. The Norwegians didn’t need this; I certainly do.
This article is a great help to me. I’ve read about this style of keeper, but I just couldn’t visualize it. Thanks very much. Now I’ll have no trouble adapting it to my own Norwegian tiller.
I’m grateful to you for showing us the way, Eric. I hadn’t had time between completing the boat and setting out on last summer’s trip to make one of these, so I had to improvise with a very short sticky rubber bungee wrapped around the tiller and a longer fabric-covered bungee from the lifting padeye to hold it in place. It was both awkward and inadequate, as you say. It needed constant adjustment because of the slipping. This is so much better.
Thank you for the acknowledgment Alex.
The trick and the mental journey was to apply the idea of a tiller comb to a push-pull stick. I was aware of no previous solution. Tension from only a lashing or shock cord is inadequate and/or clumsy, in my experience. BANDWAGON’s tender is mounted on the main thwart knee which affords a less extreme angle for the pushstick across the saddle of the device. In BANDWAGON’s case, mid-boom sheeting allows me quite a long stick. Chris’s adaption makes a lot of sense as well. It is important that the device be unobtrusive. I can hardly imagine sailing without it. My pin and index plate are brass and copper.
Nice idea, a bit simpler than the “jaws” I made, attached to my outrigger canoe aft cross beam and squeezed together with a bungee to “bite” the pole. But I have generally had to just heave-to under the mizzen for the most reliable method to adjust something since my boat does not track well after I shift my weight more than a couple of feet.
Just a thought. What if instead of the pin and plate with holes, industrial Velcro was used which would give total variability. It could be glued with construction adhesive and reinforced with small brass screws.
It’s worth a try. The hook side of some types of Velcro can snag some clothing and loosely woven fabrics, so consider unwelcome attachments.
Velcro is an interesting idea. Experiment away. On the other hand the hard pin is both completely secure yet the stick lifts with a fingertip at least in light conditions. When first noodling through this idea I was also concerned about infinite adjustability. It does not now seem a problem to me with stops as close as 1/4 or 5/16″. Helm pressure and trim can, of course, be influenced by several other factors in our little boats. There is a little bit of slop built into BANDWAGON’s entire system at every part – indexing, push-stick/cross-arm lashing,
cross-arm mount to rudder, maybe even gudgeons and pintles. The rudder is free to wiggle a wee bit.
Thanks for an excellent idea. I am putting the finishing touches on SMAUG, my 15′ Viking Dragon Ship and I will definitely include the tiller keeper.
Christopher Cunningham
This is pretty neat. I may well add it to one of my push pull tillers. One thing they all get is a lanyard of just the right length so I can steer, but it keeps me from dropping the tiller over board. It never can get more than a few inches from the hull. The Norwegians didn’t need this; I certainly do.
This article is a great help to me. I’ve read about this style of keeper, but I just couldn’t visualize it. Thanks very much. Now I’ll have no trouble adapting it to my own Norwegian tiller.
I’m grateful to you for showing us the way, Eric. I hadn’t had time between completing the boat and setting out on last summer’s trip to make one of these, so I had to improvise with a very short sticky rubber bungee wrapped around the tiller and a longer fabric-covered bungee from the lifting padeye to hold it in place. It was both awkward and inadequate, as you say. It needed constant adjustment because of the slipping. This is so much better.
Thank you for the acknowledgment Alex.
The trick and the mental journey was to apply the idea of a tiller comb to a push-pull stick. I was aware of no previous solution. Tension from only a lashing or shock cord is inadequate and/or clumsy, in my experience. BANDWAGON’s tender is mounted on the main thwart knee which affords a less extreme angle for the pushstick across the saddle of the device. In BANDWAGON’s case, mid-boom sheeting allows me quite a long stick. Chris’s adaption makes a lot of sense as well. It is important that the device be unobtrusive. I can hardly imagine sailing without it. My pin and index plate are brass and copper.
Nice idea, a bit simpler than the “jaws” I made, attached to my outrigger canoe aft cross beam and squeezed together with a bungee to “bite” the pole. But I have generally had to just heave-to under the mizzen for the most reliable method to adjust something since my boat does not track well after I shift my weight more than a couple of feet.
Just a thought. What if instead of the pin and plate with holes, industrial Velcro was used which would give total variability. It could be glued with construction adhesive and reinforced with small brass screws.
It’s worth a try. The hook side of some types of Velcro can snag some clothing and loosely woven fabrics, so consider unwelcome attachments.
Velcro is an interesting idea. Experiment away. On the other hand the hard pin is both completely secure yet the stick lifts with a fingertip at least in light conditions. When first noodling through this idea I was also concerned about infinite adjustability. It does not now seem a problem to me with stops as close as 1/4 or 5/16″. Helm pressure and trim can, of course, be influenced by several other factors in our little boats. There is a little bit of slop built into BANDWAGON’s entire system at every part – indexing, push-stick/cross-arm lashing,
cross-arm mount to rudder, maybe even gudgeons and pintles. The rudder is free to wiggle a wee bit.
Thanks for an excellent idea. I am putting the finishing touches on SMAUG, my 15′ Viking Dragon Ship and I will definitely include the tiller keeper.